Frame - 18x24 Bottom Header Frame

Qty:

Discount:

Your Price:

Save

$44.97

12%

$39.57

24%

$34.18

25%

$33.65

32%

$30.52

Qty:

Unit Cost: $0.00

Total Cost: $44.97

Description
Reviews (0)

Frame is Black and made out of 3/4" angle iron and holds most 1/8" or 3/16" materials including our 3mm PVC, 4mm, 6mm, 10mm Corrugated Plastic, 3/16" Duron Hardboard, .040, .063, .080 Aluminum and 3mm DiBond panels. 18x24 main panel slides into notches in angle and 6x24 rider slides in at bottom.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Enter the code in the box below

Our Materials

	Corrugated Plastic: Stocked in three thicknesses and an economical choice for most sign applications. Can be used with galvanized bar frames that slide into flues or angle iron frames with bolts or clips. Also available with Reflective sheeting for increased nighttime visibility. 4mm (about 1/8") for Short Term Applications. 6mm (about 1/4") for Most Real Estate & Contractor Signs. 8mm (about 5/16") for Most Real Estate & Contractor Signs. 10mm (about 7/16") for Commercial Applications. Approximate Product Life: 12 - 18 months*.
	Aluminum: Stocked in three thicknesses and a good choice for hanging sign panels on arm posts or street sign applications. Can be used in angle iron frames with bolts or clips and will provide a longer life especially if you are good at maintaining your signs. Aluminum will not rust even if the painted surface is scratched. Also available with Reflective sheeting for increased nighttime visibility. .040 (about 3/64") for Hanging Arm Post Signs. .063 (about 1/16") for Most Real Estate and Contractor Signs. .080 (about 5/64") for Commercial & Street Sign Applications. Approximate Product Life: 18 - 24 months*.
	Alumibond: Stocked in two thicknesses and a good choice where heavy-duty sign panels are required. 3mm for hanging sign panels on arm posts and 6mm for where a heavy duty sign is required. Use with heavy duty black angle iron steel frames. Both thicknesses have an aluminum face on both sides with a solid polyethylene core making this material strong and durable. This material will provide a longer life especially if you are good at maintaining your signs. 3mm (about 1/8") for Arm Post Signs. 6mm (about 1/4") for Heavy Duty Applications & Commercial Signs. Approximate Product Life: 18 - 24 months*.


	Banner: Stocked in four thicknesses to cover practically any application. 10 oz recommended for indoor applications or short-term outdoor use perfect for party and event banners. 13 oz is our most popular material and best choice for general applications. 18 oz is best for over the street banners or anywhere you need a heavy-duty banner. Fence Mesh has 1000's of small perforations to allow air to pass through while giving you the appearance of a solid banner when viewed from a distance. 10 oz for Short Term Birthday or Wedding Banners. 13 oz our Most Common Material for General Banners. 18 oz for Over the Street or Heavy-Duty Applications. Fence Mesh for baseball/football fields or business fences. Approximate Product Life: Varies depending on final application but 12 months is not uncommon for 13 oz and heavier.
	Magnetic & Decal: Magnetic is stocked in .030 thickness and used for vehicle identification where you can remove the magnetic when not conducting business. Great for when you need to promote your business on your personal vehicle. Decal is stocked in two types. Change-A-Sign decal when you need to update an old sign with a new name, phone number, address or photo. Vehicle decal is perfect for truck or car door lettering and an economical alternative for fleet lettering & graphics. Lamination is available for extended product life and recommended for all outdoor uses. Approximate Product Life: Varies depending on final application but typical product life is up to 12 months without lamination and up to 36 months with lamination. Most of our customers experience longer outdoor life with lamination but the life depends on the environmental conditions to which they are exposed.
	*As with all materials, life expectancy may vary depending on how well the sign is maintained. Signs should be stored in a Vertical position and never laid flat or stacked on each other. All signs should be stored inside when not being used. Excessive exposure to salt water, moisture and heat may also affect the life of the sign. There are many variables that can affect the life of your sign but if you maintain it properly it should provide you at least the minimum life as described above for each material.