Banner - Anniversary & Wedding
All banners are digitally printed on your choice of vinyl banner material with eco-friendly inks to give you a long lasting durable image.
Finishing options include: flat sheets with no edge finishing and clear banner tabs for sizes 2'x4' & 3'x6' only, hemmed edges with grommets, hemmed edges with twine rope or hemmed edges with twine rope and grommets to give you the most versatile way to mount your banner. Wind slits are also recommended for any banner that will be outdoors in windy conditions.
All banners are suitable for indoor or outdoor use.
Wind slits are available and we highly recommend them if you are hanging your banner between poles or along a fence. Hanging between poles or on a fence creates a giant sail that puts excess stress on the poles/fence. Wind slits are half moon shapes that are cut into the banner that allow air to pass through and help release some of the wind stress. Make sure the poles or fence you are securing the banner to can withstand the additional wind load.
Corrugated Plastic:Stocked in three thicknesses and an economical choice for most sign applications. Can be used with galvanized bar frames that slide into flues or angle iron frames with bolts or clips. Also available with Reflective sheeting for increased nighttime visibility.
4mm (about 1/8") for Short Term Applications.
6mm (about 1/4") for Most Real Estate and Contractor Signs.
10mm (about 7/16") for Commercial Applications.
Approximate Product Life: 12 - 18 months*.
Aluminum:Stocked in three thicknesses and a good choice for hanging sign panels on arm posts or street sign applications. Can be used in angle iron frames with bolts or clips and will provide a longer life especially if you are good at maintaining your signs. Aluminum will not rust even if the painted surface is scratched. Also available with Reflective sheeting for increased nighttime visibility.
.040 (about 3/64") for Hanging Arm Post Signs.
.063 (about 1/16") for Most Real Estate and Contractor Signs.
.080 (about 5/64") for Commercial & Street Sign Applications.
Approximate Product Life: 18 - 24 months*.
Alumibond:Stocked in two thicknesses and a good choice where heavy-duty sign panels are required. 3mm for hanging sign panels on arm posts and 6mm for where a heavy duty sign is required. Use with heavy duty black angle iron steel frames. Both thicknesses have an aluminum face on both sides with a solid polyethylene core making this material strong and durable. This material will provide a longer life especially if you are good at maintaining your signs.
3mm (about 1/8") for Arm Post Signs.
6mm (about 1/4") for Heavy Duty Applications & Commercial Signs.
Approximate Product Life: 18 - 24 months*.
Stocked in four thicknesses to cover practically any application.
10 oz for Short Term Birthday or Wedding Banners.
Approximate Product Life: Varies depending on final application but 12 months is not uncommon for 13 oz and heavier.
Magnetic & Decal:
Magnetic is stocked in .030 thickness and used for vehicle identification where you can remove the magnetic when not conducting business. Great for when you need to promote your business on your personal vehicle.
Approximate Product Life: Varies depending on final application but typical product life is up to 12 months without lamination and up to 36 months with lamination. Most of our customers experience longer outdoor life with lamination but the life depends on the environmental conditions to which they are exposed.
|*As with all materials, life expectancy may vary depending on how well the sign is maintained. Signs should be stored in a Vertical position and never laid flat or stacked on each other. All signs should be stored inside when not being used. Excessive exposure to salt water, moisture and heat may also affect the life of the sign. There are many variables that can affect the life of your sign but if you maintain it properly it should provide you at least the minimum life as described above for each material.|
All orders are produced from quality materials and we guarantee your complete satisfaction. If there is a manufacturing defect we will replace or refund the product at our option. Custom manufactured items that have misspelling or incorrect wording because of customers omission and the customer has approved the design or designed their sign online, cannot be replaced or payment refunded. No merchandise can be returned without our prior written authorization. Any claims must be made within 10 days of receipt of order. Shipping damage must be reported with the carrier at time of delivery. If there is concealed damage by the carrier you must contact the carrier within 24 hours of receipt for them to accept any claim. Once the product leaves our production facility, the carrier assumes full responsibility in delivering the product to you without damage. If carrier damages your product, we will work with you to resolve any claim you have with the shipping carrier but we cannot be responsible for their negligence. Your 100% satisfaction is our goal and we will work tirelessly to resolve any issue to the best of our ability.
Please note that any order cancelled after payment is made via credit card or PayPal will have a 5% cancellation and processing fee deducted from the order total.
Our size chart shows the relation between the most common sizes.
Most common sizes are as follows:
Inserts / Riders: 6"x24"
Main Yard Sign Panels: 18"x24" through 24"x36"
Commercial Signs: 36"x48" through 48"x96"
If you have any questions about size options please call our office at 800-321-7118 and speak to one of our friendly customer service team members.